User Manual

4- Remote Configuration
___________________________________________________________________________
User Manual VS-102 HDSD/HDI - V2.3 Page 41 of 64 5/7/12
Email Notification
Specify the information to send when email is selected as an Event Action.
 Server Address: Enter email (SMTP) server address.
 Port: Specify a port for SMTP operation. Port 25 is the default port in SMTP
operation. If a different port is configured in the SMTP server, this port will need to be
changed accordingly.
 Sender Address: Enter an account registered to the SMTP server.
 Authentication for SMTP Server: Set authentication server requirements for
sending emails.
 ID & Password: When the server requires authentication, ID and Password of an
email account needs to be entered.
 Destination Address: More than one address can be used by entering delimiting
comma (,) or semi-colon (;). Destination address maximum is 63 characters.
 Video Clip Attaching: Video clip stored at the moment of event can be attached as
an AVI or JPEG file format. When dual encoding is enabled, Primary Video,
Secondary Video (H.264 only) or JPEG Capture can be selected. The duration of
video clip can be configured with Pre-Event Time and Post-Event Time in Event
Record section.
 Number of Frames: The number of JPEG frames can be configured. This setting is
applicable only when JPEG Capture is selected.
 Email Test: Email sending can be tested with this button. The configured settings
should be saved first by pressing the “Apply” button before using the Email Test
function. One of the following messages will be sent as a result of the test: