User Manual

020.
TROUBLESHOOTING
PROBLEM CAUSE ACTION
THERE IS A
CRACKLING
SOUND
The amplifier is clipping as it
has run out of output power.
Decrease the volume on your
audio source.
Lower the volume or bass on
the Acton II.
THE AUDIO IS
DISTORTED
Volume is set too high on the
audio source.
Turn down the playback
volume on the audio source.
The audio stream or audio file
is of poor quality.
Try another audio file or music
player.
Volume is set too high on the
Acton II.
Lower the volume on the
speaker.
Too much bass/treble on the
speaker.
Lower the bass/treble on the
speaker.
ERRATIC
PERFORMANCE
Interference from another
electronic device.
Move the Acton II to another
spot.
Turn off or move the interfering
electronic device.