Operation Manual

016.
LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PRESSING SOURCE/WAKE
ON THE SPEAKER. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING RED
LIGHT IF NO DEVICE IS CONNECTED, AND A SOLID RED LIGHT IF A DEVICE
IS CONNECTED. ACTON SPEAKER WILL NOW AUTOMATICALLY SEARCH FOR
PAIRED DEVICES FOR 3 MINUTES, AND THE LED WILL RAPIDLY FLASH RED
DURING THE SEARCH. THE ACTON SPEAKER WILL LOCATE DEVICES WITHIN
RANGE THAT HAVE PREVIOUSLY BEEN CONNECTED AND WILL CONNECT
THEM AUTOMATICALLY. IF NO DEVICES ARE LOCATED WITHIN THREE MIN-
UTES, THE ACTON SPEAKER WILL REVERT TO STANDBY STATUS (EITHER
POWERSAVER MODE OR STANDARD MODE, DEPENDING ON WHICH OPTION
YOU CHOOSE. THERE IS MORE INFORMATION ON MODES IN THE STANDBY
MODES SECTION ON PAGE 020.). IF THE PAIR BUTTON IS PRESSED WHILE
BLUETOOTH IS SELECTED AS THE AUDIO SOURCE, THE ACTON LOUD-
SPEAKER WILL PERFORM A NEW SEARCH FOR THREE MINUTES AFTER-
WARDS, DURING WHICH TIME, THE LED LIGHT WILL RAPIDLY FLASH RED.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE ACTON LOUDSPEAKER
IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT.
• IF A SEVENTH DEVICE IS CONNECTED, DEVICE A WILL NO LONGER BE MEMORISED.
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN
START ACTON LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.