MG15FX MG30FX 1 From Jim Marshall I would personally like to congratulate you on your purchase of this next-generation Marshall MG amplifier. As a musician myself, I fully understand what it takes to perform live in a band situation. In addition to talent, dedication and a lot of hard work, you also need equipment that does exactly what you ask of it. Over the years I have witnessed many advances in amplifier technology and I wanted this MG series to take full advantage of such innovations.
MG15FX & MG30FX Overview Channel Selection The amplifier has 4 channels - Clean, Crunch, OD1 & OD2. When channel settings have been stored the current channel light (3 or 5) will stop flashing indicating the preset has been saved. Pressing the OD switch (5) selects between the OD1 (Green Light) and OD2 (Red Light) channels. Reverb The Reverb control (8) sets the amount of signal sent to the reverb section - allowing the reverb to spill between channels as different presets are recalled.
MG50FX / MG100FX Technical Specifications MG50FX Combo 50W 4 1x12" 16.
MG50FX & MG100FX / MG100HFX Overview Channel Selection The amplifier has 4 channels - Clean, Crunch, OD1 & OD2. When channel settings have been stored the current channel light (3 or 5) will stop flashing indicating the preset has been saved. Pressing the OD switch (5) selects between the OD1 (Green Light) and OD2 (Red Light) channels. Reverb The Reverb control sets the amount of signal sent to the reverb section - allowing the reverb to spill between channels as different presets are recalled.
Footcontroller (optional - PEDL-90008) 1. Footswitches Each footswitch can be assigned a different stored function. 2. LED Status Panel This always reflects the current status of the amplifier or tuner details: The Digital Display (3) indicates the closest current note being played. The indicator dot on the lower right hand corner shows if the current closest note is #. Pressing only the Store switch at this point will overwrite the altered Channel or Footswitch preset.
Marshall Factory Presets Clean: pure guitar tone with a touch of chorus + reverb MG50FX MG100FX green MG15FX MG30FX green Crunch: low gain bluesy tone with subtle reverb MG50FX MG100FX red MG15FX MG30FX red OD1: raw heavy crunch, no effects MG50FX MG100FX green MG15FX MG30FX green OD2: high gain solo, reverb + delay 640ms MG50FX MG100FX red 640ms MG15FX MG30FX red Marshall Amplification plc Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England.
