Operation Manual

ManualsBrandsMarshall ManualsMiscellaneousVT-1 Vibratetrem

VT-1 Vibratrem

Vibratrem Suggested Settings

Owners Manual

VINTAGE TREM (Amp: Clean)

SLOW SWELL (Amp: Clean)

CLASSIC VIBRATO (Amp: Clean)

SWITCHING VIBRATO (Amp: Clean)

Whilst the information contained herein is correct at the time of

publication, due to our policy of constant improvement and

development, Marshall Amplification plc reserve the right to alter

specifications without prior notice.

7 / 05

Marshall Amplification plc

Denbigh Road, Bletchley, Milton Keynes,

MK1 1DQ, England.

Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118

www.marshallamps.com

Summary of content (5 pages)

PAGE 1
Vibratrem Suggested Settings VT-1 Vibratrem VINTAGE TREM (Amp: Clean) SLOW SWELL (Amp: Clean) Marshall Amplification plc Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. CLASSIC VIBRATO (Amp: Clean) Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118 www.marshallamps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Marshall Amplification plc reserve the right to alter specifications without prior notice.
PAGE 2
WARNING! 5 3 4 7 IMPORTANT Precautions 8 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. From The Chairman I would like to personally thank you for selecting one of our effects pedals.
PAGE 3
Introduction Of all the retro effects to hit the shops in recent years, perhaps the most authentic and coolest is tremolo. Instantly calling up the spirit of the 60s, Tremolo was the first effect to appear on a Marshall amp in the early 1960s. The late 90s sees Marshall updating the tremolo effect in the form of the Vibratrem. By using split phase modulation a truely awesome stereo sound field can be created by connecting the VT-1 up to two amplifiers.
PAGE 4
. Speed Indicates when the Vibratrem is in operation. WHAT IF NO OUTPUT NOISE IN BYPASS 8. Shape INDICATOR LED NOT ON The Shape control affects the modulation waveform of the VT-1. In short, the shape of the modulation waveform determines the manner in which the VT-1 circuitry turns the signal level up and down in creating the tremolo and shifts phase in the case of vibrato. The triangle wave ( ) creates a gradual swelling tremolo and subtly phasing vibrato.
PAGE 5
Battery Replacement 1. To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead. 2. Use PP3 or equivalent battery (for improved battery life use alkaline type) 3. Always ensure that the battery is removed when the pedal is not in use for long periods. 4. Dispose of old battery in a safe place. Unas palabras del Presidente Quiero agradecerte personalmente el haber elegido uno de nuestros pedales de efectos.