Instruction Manual

Charging port
POWER button
Play /pause button
Wheat Fiber /Bamboo BT Speaker
How to connect this speaker :
1)Press and hold the POWER buttotn for 2-3 seconds to
power ON, you will hear “the device is ready to pair” from the
speaker, the blue LED will flash quickly to indicate that it is
powered on and searching for a Bluetooth source to pair with
.
2)Go into your phone/tablet’s bluetooth settings and enable
Bluetooth,Next ,enter the Bluetooth device list and select
“#25400”. once the pairing is successful,you will hear “the
bluetooth device is connected successfully”from the speaker
and the LED will light up solid blue.
Play/Pause :
When playing ,Tap the POWER button can be play/pause .
Charging light:
when charging, indicator light is red. When Fully charged,
light is off.
Wheat Fiber /Bamboo BT Speaker
Including
1* Speaker
1*charing cable
1* instruction manual
Specifications:
Bluetooth Version: 5.0
Built-in Lithium-Ion Battery : 3.7V,300mAh
Material: Bamboo+wheat Fiber +PU
Charging Voltage: 5V
Speaker : 57mm,4 Ω 3AX1
Effective Distance : 10M