User's Manual

SMARTPHONE/TABLET CONNECTION
Touch Keyboard - Android
Getting Connected - iOS & Android
Touch Keyboard - iOS
Simply follow instruction in
5 can be skipped since iOS & Android will not require pin-code
for connection.
,in which step[BT mode - HID] (page 9)
To toggle iOS Touch Keyboard, please press this button.
While connected with the scanner, the Touch Keyboard on the
Android smartphone or tablet might disappear. To resolve this
issue, please change settings on Android device with below steps:
1. Enter “Settings”
2. Enter “Language & input”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.
iOS Hotkey Button
3. Tap on “Default keyboard”
- 13 - - 14 -
. E053$
. E054$
DISABLE
ENABLE
In Batch Mode, data will be temporarily stored in memory buffer
(2KB RAM) when the scanner is out of range or in poor connection
quality. Once the scanner gets back in range, the stored data will
be sent back to the host immediately, which will also be erased in
memory buffer at the same time.
Batch Mode can only function in the following conditions:
1. The scanner is connected to a host device via BT HID/SPP.
2. The scanner is NOT in Memory Mode or USB HID/VCP Mode.
BATCH MODE