Instruction Manual

7-7 Doc. Cal. Mode
Menu Items
The menu items shown on the bottom of the Tag Status
screen are described below:
Menu Item Allows you to …
Tag Specify a particular tag for viewing or
calibration purposes.
TP View the expected input and output
measurements of each test point for
the current tag.
Rslt View the calibration or test results of
the last test performed on the current
tag.
→ Access the Back Screen level where
you can access the Execute level, erase
all data recorded for a particular tag,
or return to the Main level.
Viewing a Specific Tag
From the Tag Status screen, do one of the following to
specify a particular tag for viewing or calibration
purposes:
 Use the up and down arrow keys on the keypad to
scroll to the tag you want to view.
 Press the function key corresponding to the menu
item Tag, then use the number keys on the keypad
to specify the tag number you want to view. Press
the ENTER key.