Instruction Manual

4-11 User Preferences
2. Press the function key corresponding to the menu
item Day to display the Set Day screen as shown
below:
3. Use the numbers on the keypad to enter the day of
the month between 0 and 31, then press the
ENTER key to return to the Set Date menu.
NOTE: If you attempt to enter a value outside this
range, an Invalid Entry message will
appear. To erase an existing entry or to correct a
mistake, use the CLR key to erase the character to
the left of the cursor.
4. To set values for month and year, repeat steps 2
and 3, pressing the appropriate function keys.
NOTE: If you set the year to a value of 90 or
lower, the system will automatically prefix the
value with 20, i.e., 2090. The system will prefix all
other values with 19.
5. Press the CLR key to return to the Setup menu.
Formatting the Date
You can specify the calibrator date to appear in any of
the following formats:
 dmy (day, month, year)
 mdy (month, day, year)
 ymd (year, month, day)
Set Day