MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Date Printed: 12/17/12 Page: 1
3
STORAGE: Store in a moderate cool, dry, well ventilated area away from direct sources of
heat. Avoid freezing (32F). Position containers so that any labeling information is visible. Keep
containers closed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: The use of local exhaust ventilation is recommended to
control emissions near the source. Additional engineering controls should be used as necessary.
RESPIRATORY PROTECTION: Respiratory protection is generally not required. A
respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements must be
followed whenever workplace conditions warrant a respirator's use.
SKIN PROTECTION: Impervious clothing should be worn when gross contact is likely, such
as when cleaning up large spills. Neoprene gloves may provide protection against permeation.
EYE PROTECTION: Use safety glasses with side shields (ANSI Z87.1 or approved
equivalent).
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT: 212 Deg. F
MELTING POINT: Not determined.
VAPOR PRESSURE: Not Determined
VAPOR DENSITY: Not Determined.
SOLUBILITY IN WATER: 100% Soluble or dispersible.
SPECIFIC GRAVITY: 1.42
PH: 8.5 to 9.5
ODOR: Acrylic odor
APPEARANCE: Milky White
COATING VOC: .4 lb/gl
MATERIAL VOC: .13 lb/gl
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY (CONDITIONS TO AVOID): This material is considered stable.
However, avoid temperatures above 177C/350F, the onset of polymer decomposition. Thermal
decomposition is dependent on time and temperature.
INCOMPATIBILITY: There are no known materials which are incompatible with this
product.
HAZARDOUS DECOMPOSITION PRODUCTS: Hazardous decomposition will not occur.
HAZARDOUS POLYMERIZATION: Product will not undergo polymerization.