Installation Guide

Christmas Tree
Model: DOUT1845750CLSE
Sku # 619 380
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical
rating is 2.55A 120V 60Hz.
c. This seasonal product is not intended for permanent
installation or use.
d.Do not mount or place the product near gas or
electric heaters, fireplaces, candles, or other similar
sources of heat.
e. Do not secure the wiring of the product with staples
or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any
wire.
g.Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h.This is an electric product and not a toy! To avoid risk
of fire, burns, personal injury and electric shock it
should not be played with or placed where small
children can reach it.
i. Do not use this product for other than its intended
use.
j. Do not hang ornaments or other objects from cord,
wire, or light string.
k. Do not close doors or windows on the product or
extensions cords as this may damage the wire
insulation.
l. Do not cover the product with cloth, paper, or any
material that is not a part of the product when in use.
m.Read and follow all instructions that are on the
product or provided with the product.
n. SAVE THESE INSTRUCTIONS
Pre-Assembly
Assembling the tree stand
Assembly
When using electrical products, basic precautions
should always be followed, including the following:
Part Description Quantity
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs and lay the stand in a flat area.
Then slide the locking disc downward and snap
into place.
Step 3.When inserting the bottom section of the tree
into the assembled stand, thread the eyebolt
into the stand and tighten until the pole is firmly
secured.
Step 1.Remove the protective caps from the tree
bottom (C) and insert the pole into the tree
stand (D).
Step 2.Remove the protective caps from the tree center
(B) and insert the pole into the tree bottom (C) .
Step 3.Insert the tree top (A) into the tree center (B).
Step 4.Shape the branches to your preference by
working from the bottom to the top. When
adjusting branches, ensure that all wires are free
of branch hinges.
Step 5.Connect the plug(s) securely to the extension
cord(s) as per the color labels indicated in
attached photo and insert the green label
extension cord plug into the wall outlet.
Step 6.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Assembling the tree
Eye Bolt
Section 3
Section 2
Section 1
Insert
Green Label
Plug Into Wall
Outlet
S100
S100
S100
S100
S100
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Foot Pedal
on/off Switch
S100
S100
S50