Instructions / Assembly

Christmas Tree
Model: DOUT1845750CLSE
Sku # 619 380
Operation
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged
into each other and that the tree is plugged
into the wall. If your tree came with a foot
pedal, step on the On/Off button.
Check for blown fuses at the light string
and power cord plugs. Replace as needed
with the replacement fuses provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
NOTE: If some bulbs do not light or flicker, search for
any loose plugs and/or broken, loose, or missing
bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to
maintain the performance and life expectancy
of your tree.
Step 1.Connect the light strings of the tree together
and plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the
This tree package includes hinge pins, washers, bulbs,
and fuses for any replacement or repair that you need
to perform on your tree. If extra parts are needed,
contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday
through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug
each section of the tree.
Step 3.Gently lift the tree top straight up to remove
from the center section and fold all branches
towards the pole.
Step 4.Repeat this step for the center and bottom tree
sections.
Step 5.Carefully place all tree sections into a shipping
box and tape it shut.
Step 6.Store your tree in a cool, dry place away from
sunlight.
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.
WARNING - Risk of fire: This product employs overload
protection (fuse lamp) in each series light circuit to
provide overload protection in addition to the fuse(s)
located in the plug. Do not replace the fuse lamp
contained in this set with any other type of lamp, use
only spare fuse lamps provided with this product. In case
of a burnt out FUSED lamp, the entire series of 50 lamps
will be out. To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull the burnt fused lamp and
plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can
be distinguished by a gray lamp base and an
additional clear plastic cover.
4. Plug in the lights again.
1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top
of attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse
only with 5, 7 or 10 Amp,
125 Volt fuse for the power
cord set.
5. Close fuse cover. Slide closed
the fuse access cover on
top of attachment plug.
6. Risk of fire.Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
SPARE FUSE
Fuse replacement
User servicing instructions
Fused Lamp Replacement