Installation Guide

rings, put the rings on the rod first, then adjust the rod to the appropriate width
and slide the rod onto the mounting brackets. Clip the rings to the window
treatments, making sure to space the fabric evenly.
b. To hang moveable window treatments, you will probably use a traverse rod
with either hooks or clip rings. If you are using hooks, slide the pointed end of
the hook up through the back of the fabric; making sure that the hook stays
on the inside of the fabric and does not show in the front. Use one hook for
each pleat, or equally space the hooks across the fabric. The hooks should all
be the same distance from the top of the fabric—low enough that the fabric
covers the traverse rod. Once all of the hooks are in place, place the traverse
rod in the “closed” position, so that the plastic grommets in the rod are evenly
spaced across the window. Start from one end and place the first and second
hooks into the fixed end of the traverse rod. Continue to place the hooks in
grommets until all of the hooks are attached.