Installation & Assembly

Page 1 of 2

ASSEMBLY INSTRUCTIONS

Culver Pendant Lamp (Item#: MT151-0033)

Important Safety Instructions:

• We recommend you contact a professional electrician to install any hardwired lighting. Incorrect

installation can lead to fires.

• These instructions are provided for your safety. It is very important that they are read carefully and completely

before assembling fixture..

• This fixture has been rated for up to (1) 40-watt maximum TYPE A bulbs or (1) 7-watt compact fluorescent

light bulbs. To avoid the risk of fire, do not exceed the recommended wattage.

Pre-assembly:

 Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

 Remove all parts and hardware from box along with any plastic protective packaging.

Parts Enclosed: Hardwire Parts:

Warning:

 Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or

hardware.

 Remove all parts and hardware from box along with any plastic protective packaging.

Note:

To install you will need: Screwdriver/Electrical tape

PAGE 1
ASSEMBLY INSTRUCTIONS Culver Pendant Lamp (Item#: MT151-0033) Important Safety Instructions: • We recommend you contact a professional electrician to install any hardwired lighting. Incorrect installation can lead to fires. • These instructions are provided for your safety. It is very important that they are read carefully and completely before assembling fixture.. • This fixture has been rated for up to (1) 40-watt maximum TYPE A bulbs or (1) 7-watt compact fluorescent light bulbs.
PAGE 2
Assembly Instruction: Care instructions: • Wipe with soft dry cloth only • Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.