Installation & Assembly

Step1. Put the nut (H) through the cord (J) and lock into the base (G) and tighten by the wrench (I).
Step2. Screw the long pole (F) onto the Base (G) while pulling cord (J) through long pole.
Step3. Screw the long pole (E) onto the long pole (F).
Step4. Screw the Swing Arm (D) onto the long pole (E).
Step5. Put the lamp shade（A）on the lamp holder and locking the lamp ring (B).
Step6. Assembly is completed.
Care instructions:
• Wipe with soft dry cloth only
• Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.
Thank you for your purchase