User Guide

pdfcrowd.com
into your computer’s USB port (or a
power outlet via a USB
wall adapter, sold separately).
The LED light will show solid red
when the watch is receiving power.
The LED light will show solid green
when the watch is fully charged.
Full charge is reached in approximately 2-3 hours from a power outlet,
3-4 hours when charging from a computer. These are approximate times for a
completely drained (10%-0%) battery.
Battery Life – Your Martian Notifier allows 4-5 days of use per charge. The time
piece will run
for approximately 2 years on its separate battery, allowing your Martian to be
used as a regular watch
even if your rechargeable battery is fully depleted.
* Note: The metal micro-USB end connector on the Martian Notifier charging
cable is longer than those on most micro-USB cables. Shorter connectors will
likely not work with your Martian Notifier. However, this cable can be used for
most other devices that use a micro USB connector for charging purposes.
Warning: Due to the nature of the Lithium polymer rechargeable battery, a
Martian Watches lithium battery that is inactive for over one year may fall into a
deep discharge state or could cause the battery to permanently lose it’s ability
to charge. For long-term storage, please be sure to charge and discharge your
Martian Watch at least once every six months to prevent a decrease in battery
performance; store your Martian Watch in a dry place with low humidity and at
temperature range of 10  to 30, 50 to 90 F; avoid exposure to temperatures
higher than 95 F (35° C).
TOP
PAIRING YOUR WATCH TO YOUR iOS DEVICE
On your Martian Notifier watch:
•Turn on your watch (long-press the bottom button). (Before pairing, your watch
battery should be charged to at least 50%.)