User's Manual

checkmark in the box (On), and vice versa.
Note: If you turn DND to “On”, you MUST later navigate again to DND and
uncheck the box in order to begin receiving notifications again.
Camera Mode: This feature allows you to use the watch’s top button to
trigger the shutter on your smartphone’s camera. This allows you to take a
group photo with everyone in the picture, or to set the phone in a position
where a remote shutter trigger will assure you of a steady camera.
To use this, navigate to “Camera Mode” in the Watch Menu. Press the top
button once to activate the feature; then each additional top button press will
instantly take a photo from the device. A long-press of the top button will
start a 3-second delay before the shutter is triggered. The shutter activation
feature will remain active until you either press the bottom button or it times
out after about 2 minutes. The LED light will blink white when in Camera
Mode.
Note: This function may not work with third party camera apps on your
device.
Find Phone: If you misplace your phone and the Watch Menu shows that
you have a Bluetooth connection, navigate to “Find Phone” in the menu and
press the top button. Your Martian Notifier will cause the phone to play a bar
of music to help you locate it (requires connection to the Martian Notifier
App).
Note: A short-cut to finding your phone is to simply press the top button on
your watch. If the phone is within range it should trigger a tone from your
voice command program.
Setup Sub-Menu: The following items are found by first navigating to the
Setup option in the Watch Menu. After pressing the top button to enter the
Setup sub-menu, navigation works the same as in the primary menu.
Languages: Supported languages are English, Spanish, French, German,
Japanese, Chinese and Korean. Using the bottom button, navigate to
Setup>English and then use the top button to scroll through the languages.
When you reach the desired language, either tap the bottom button to keep
that selection and move on to the next menu item, or the watch
will!automatically exit and save your changes after 3 seconds.
Date format: You can choose to view your date as mm/dd or dd/mm. Use
the top button to scroll between mm/dd and dd/mm. When you reach the
layout you prefer, either tap the bottom button to keep that selection and
move on to the next menu item, or the watch will!automatically!exit!and save
your changes after 3 seconds.
Leash: When your watch and phone are separated and out of Bluetooth
connection range, the Martian Leash setting will activate a pattern of three
short vibrations, a red LED light flash, and an “Out of range” message on the
OLED display. Each time the watch returns to the range of the phone, it will
deliver a pattern of two short vibrations and the OLED display screen will
show “Connected”.