User's Manual

Choose Time Format: Choose the way you want the digital time to be
displayed; either 12-hour (1:00-12:00 for AM and PM) or 24-hour (i.e. 11:00,
12:00, 13:00, 14:00) time format.
Choose Scroll Speed: Your messages scroll across the OLED display on
your watch. Tap on Scroll Speed to choose a speed from 1 to 4; 4 is the
fastest.
Choose Alert Scroll Delay: When a message first appears on your OLED
display, it pauses on the sender name before it starts scrolling the
message. Tap Alert Scroll Delay to choose the length of the pause, from 2 to
5 seconds.
Character Limit: You may choose whether you want to only receive the first
40 characters of incoming notifications, or more than 40 characters. This
choice may be for convenience or safety. The default setting is “OFF”,
allowing longer notifications. To choose the 40-character maximum, tap to
add a checkmark in the box next to Character Limit.
Enable Restriction Lock: This feature allows you to “lock” the 40-character
limit into place and require a password to change the setting. (This can be
used, for example, to make certain teens are not tempted to read long
messages while driving.) To enable:
• Tap on Character Limit to go to the Restriction Control screen.
• Tap to add a checkmark in the box next to “Restriction Control”.
• Enter a 4-digit numeric passcode, and enter it a second time to confirm.
• Tap the Enter (down arrow) key on your phone to enable the Restriction
Lock.
IMPORTANT: DO NOT FORGET YOUR 4-DIGIT PASSCODE! IF YOU
LOSE IT, YOU CANNOT UNLOCK THE CHARACTER RESTRICTION
YOURSELF. YOU MUST SEND THE WATCH TO MARTIAN WATCHES
TO UNLOCK IT. THIS IS NOT COVERED UNDER WARRANTY – SEE
“SERVICE & REPAIR FOR OUT-OF-WARRANTY PRODUCTS”
SECTION OF http://www.martianwatches.com/warranty/ FOR MORE
INFORMATION.
!
Help Tab
Note: Each of the features below (except signal strength) requires a
connection to the Internet: