User's Manual

!
!
• Open the Martian Notifier App and go to the Home tab. Tap the “Start”
button.
• A pop-up will appear that says “Please turn on Android mode in your
watch’s settings”. Tap “OK”.
• Tap “scan for devices”. A list of available devices will appear.
• Tap on “Martian Notifier”.
• After a moment, a 6-digit number will appear on your watch and App.
Confirm that the numbers match and tap “Pair”.
• If pairing is successful, “Paired to (Your Phone)” will appear on the watch’s
OLED display, and “Watch and app are connected” will show on the App.
• If Accessibility has not been turned on, a pop-up will appear asking if you
want to turn it on. Tap “OK” and you will be transferred to the Accessibility
menu and you need to:
• Tap on Martian Notifier, toggle on, and tap “OK”.
• Tap the “back” arrow twice on your phone to return to the App screen.
Note: If pairing is not successful, turn watch off and back on, turn your
device’s Bluetooth off and back on, uncheck “Android” from your watch
menu and recheck, then repeat the directions in this section again.
TOP