User`s guide

16 AQX TECHNICAL SPECIFICATIONS

INPUTS 2 Electronically Balanced

Impedance 20K ohms (10K ohms per leg single ended)

CMRR 60dB 20Hz – 10KHz

Connectors 3 Pin female XLR

OUTPUTS 4 Electronically Balanced

Source Impedance 62 ohms

Min Load Impedance 600 ohms

Max Output +20dBu into 600 ohms

Connectors 3 Pin Male XLR

Frequency Response -3dB’s@ 18 Hz 12dB’s /octave

-3dB’s@ 45KHz 12dB’s /octave

(ultimately set by system parameters)

Distortion + noise 0.01% THD @ 2V output (limiters cancelled)

Signal + Noise/ >100dB’s @ 2V output

Noise Ratio

Limiters Individual for each channel

Ratio 20:1.Threshold range –12dBu to +12dBu

In 16 steps

Mains Supply Captive 2m 3 core cable with integral U.K. 3 pin plug

Mains Voltage Internally selectable by hard wire link* 100-120/

220-240VAC, 50/60 Hz.Voltage tolerance on each

setting ± 10%

Mains Fuse 100-120V and 220-240V: - 160mA Type ‘T’ (L)

Dimensions (W) 483mm x (H) 44mm x (D) 155mm

(W) 19ins x (H) 1.75ins x (D) 6.1ins

Shipping Dimensions (W) 545mm x (H) 120mm x (D) 235mm

(W) 21.5ins x (H) 4.7ins x (D) 9.3ins

Weight 2.4Kg (5.3Ibs)

Shipping Weight 2.9Kg (6.4Ibs)

* NO ATTEMPT SHOULD BE MADE BY THE USER TO CHANGE THE MAINS

OPERATING VOLTAGE FROM THAT SUPPLIED, REFER TO QUALIFIED

PERSONNEL ONLY.

Martin Audio – AQX Controller

ENGLISH

CONTENTS