User`s guide

3 SAFETY INSTRUCTIONS

Before using your AQX controller, please read the operating instructions

and the safety suggestions.

Keep this manual for future reference.

Do not operate the controller if liquid ingress is suspected.

Do not stand water or any other liquid on, or near the controller.

Do not use this controller near water. Do not operate the controller if wet or

standing in liquid.

Clean only with a dry cloth.

Always install the unit in accordance with the instructions.

Do not operate the controller on or near any source of heat, such as

radiators, lighting dimmer racks, or other apparatus that produce heat.

Always operate the unit with the chassis ground wire connected to the

electrical safety earth. Do not tamper with the electrical safety earth, it is

provided for your safety. A grounding type plug is fitted; this has two pins

and a third grounding prong. If the plug provided does not fit your mains

outlet, consult an electrician or a competent person to replace the fitted

plug.

Connect only to AC power outlets rated 230 - 240V (or 100 - 120 V),

50-60Hz.

Do not use this controller if the mains cable is damaged or frayed,

particularly check where the mains cable exits the controller and the mains

plug. Protect the mains cable from being walked upon or rolled over by

heavy objects.

Only use accessories specified by the manufacturer.

The unit is intended for use in a 19" rack. Follow the mounting instructions.

Refer all servicing to qualified personnel only. Servicing is required when

the apparatus has been damaged in any way such as:

Mains cable, or plug is damaged.

Liquid has entered the controller.

An object has fallen into the unit.

The controller has been exposed to rain or moisture.

The controller does not operate normally.

The controller was dropped or the enclosure is damaged.

An experienced person should always supervise inexperienced adults or

minors when using professional audio equipment.

Martin Audio – AQX Controller

ENGLISH

CONTENTS