- Martain Audio User's Guide Subwoofer CS10, CS10T, C10.1R, C10.1C

Please note:

The HF compression driver sections of the C10.1R and C10.1C

ceiling loudspeakers are protected with a PTC (positive temperature

coefficient) device and will quieten if overdriven. The PTC device will

reset itself once the signal is reduced to a more sensible level.

Installation notes

Note carefully!

Ceiling loudspeakers must be installed by experienced

ceiling loudspeaker installation technicians

Martin Audio C10.1R and C10.1C loudspeakers are

designed to be used with either Atlas or Lowell enclosures

(see earlier). These enclosure must be installed in

accordance with the manufacture’s instructions

Do not allow these ceiling loudspeakers to be supported by

the ceiling grid alone. These ceiling loudspeakers must be

attached to a secure part of the building using the seismic

anchor points on the relevant enclosure

It is the installer’s responsibility to ensure that all relevant

local, national and international electrical, fire and building

safety regulations are complied with

We suggest that your chosen fixing method should be

designed for a 10:1 safety factor. As a C10.1RT or C10.1CT

weighs 8Kg, this means that your chosen fixture must be

designed for suspending 80Kg without damage or distortion

Check with the architectural authorities before attaching

these ceiling loudspeakers to the building structure

Connections

Amplifier power input is via a 4-pin rising clamp plug providing

+ and – Inputs and + and – Loop Through connections.

Input & Loop through