- Martain Audio User's Guide Subwoofer CS10, CS10T, C10.1R, C10.1C

CS10T ceiling subwoofers have a transformer power selector switch

on the connector panel (location arrowed)

CS10 Installation notes

Note carefully!

Martin Audio ceiling loudspeakers must be installed by

experienced ceiling loudspeaker installation technicians

It is the installer’s responsibility to ensure that all relevant

local, national and international electrical, fire and building

safety regulations are complied with

Threaded steel rods or steel eyebolts must be permanently

attached to the brackets provided using aircraft style locking

nuts so that they cannot loosen under vibration. Do not

simply hang this product from “hooks” as it could

escape from them when driven with low frequency

signals at high volume

Your chosen fixing method must be designed for a 10:1

safety factor. As a CS10T weighs 18Kg, this means that your

chosen fixture must be designed for suspending 180Kg

without damage or distortion

Check with the architectural authorities before attaching

these ceiling loudspeakers to the building structure

The CS10 subwoofer must be fixed to a load-bearing part of the

building structure via the three right-angled fixing brackets.