Technical data

10. Line Level Output Socket. When a processing module is fitted, left

and right sub bass signals can be routed to this output. See module

operating instructions for a full description.

11. and 12 Input Link Sockets. 3 pin male XLR connectors are provided

which are connected in parallel with the input sockets. These can be used

for "daisy chaining" the signal to other amplifiers.

Mains Voltage Selection. The E1300 is dual voltage selectable; it is

normally supplied pre selected for 220/240 Volt AC operation only. For use

on 110/115 Volts AC, internal modifications must be made.

Warning:This modification should only be carried out by an

experienced service technician.

Contact Martin Audio Ltd or an appointed distributor for details.

Martin Audio – E1300 Amplifier

ENGLISH

CONTENTS

GUIDES