Specifications

Martin Audio – EMX2A System Controller
ENGLISH
8
12 TECHNICAL SPECIFICATIONS
EMX2A
INPUTS (SIGNAL) 2 Electronically Balanced
IMPEDANCE 36K ohms (18K ohms per leg single ended)
CMRR 60dB 20Hz - 10KHz
CONNECTORS 3 Pin female XLR
INPUTS (SENSE) 6 Electronically Balanced
IMPEDANCE 36K ohms
CONNECTORS Shrouded 4mm sockets
OUTPUTS 6 Electronically Balanced
SOURCE IMPEDANCE 47 ohms
MIN LOAD IMPEDANCE 500 ohms
MAX OUTPUT +20dBu into 500 ohms limiter defeated
CONNECTORS 3 Pin Male XLR
FREQUENCY RESPONSE -3dB @ 25Hz 12dB/octave
-3dB @ 35KHz 12dB/octave
DISTORTION+NOISE 0.01%THD @ 2V output (limiters cancelled)
SIGNAL+NOISE/ >97dB @ 2V output 20Hz - 20KHz quasi peak
NOISE RATIO o/c input
LIMITERS Individual for each channel. With program
related attack times Ratio 20:1
INDICATORS 6 x Limit LED’s. Sub/Full Range LED’s
MAINS SUPPLY IEC mains connector with integral fuse holder
MAINS VOLTAGE Externally selectable on IEC inlet
100-120-220-240V AC, 50/60Hz.
Voltage tolerance on each setting ± 10%
MAINS FUSE 220-240V: -250mA Type ‘T’ (L)
100-120V: -500mA Type ‘T’ (L)
DIMENSIONS (W) 482mm x (H) 45mm x (D) 211mm
(W) 19ins x (H) 1.8ins x (D) 8.3ins
WEIGHT 3.5kg (7.7lbs)
SHIPPING DIMENSIONS (W) 530mm x (H) 120mm x (D) 310mm
(W) 21ins x (H) 4.7ins x (D) 12.2ins
SHIPPING WEIGHT 4.1kg (9lbs)
Due to our policy of continuous improvement all specifications are subject to change
without notice.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES