User guide

Engineer 418 & 818 User Manual Page 65
Linking channels
Each input and output can be linked into a stereo pair. This means channels 1 and 2, 3 and 4, and so forth can
be controlled as one. To use this option select the “Stereo link” tool from the edit menu in the program’s
toolbar.
From here, you can select each channel you want to link. As soon as you hit “Apply” or “OK” each second
(even) channel will start using its partner’s settings. This can result in sudden changes in outbound signal
levels, so take care not to damage any equipment.
Once linked, each channel’s tab page will reflect its linked status: The names of both channels will appear as
the title, and all settings made will reflect on both channels. Only the output mutes can be controlled
individually.