Technical data

Audio Equipment FOH Speakers
FBT HiMaxX 60A Powered Speaker
Features
• Lightweight Polypropylene Cabinet, 62.5 lbs.
• Bi amplified: 700w RMS LF & 200w RMS HF
• Continuous Program Power: 1400 w LF, 400 w HF
• Control Panel with Volume Control, 3 band EQ,
• Ground Lift Switch, Neutrik® Combo Jack Balanced Ins/Outs
Multiple mounting options:
• *Wall, *Ceiling, *Cluster, Speaker Stands
• *Optional accessories required
• Four M - 10 fly points
• Optional Carrying Bags available for protection for portable use
• High SPL capability: 129 dB: with music source
FBT HiMaxX 100SA Powered Sub-Woofer
Features
• 13 ply Birch Plywood Cabinet w/ Tour Grade Black Paint finish
• Power Output: 900w RMS, 1800w Continuous Program Power
• High SPL Capability: 133dB with music source
• Control Panel with Master Volume Control,
•0° -180° Phase reversal switch,
•Left and right channel balanced inputs, Link outs,
•Left and right channel Balanced filtered outputs
•Ground Lift Switch, Neutrik XLR Balanced ins/outs
• Top mount satellite speaker socket
• Completely Manufactured in Italy
FBT MaxX 9sa
FEATURES:
- Sub-woofer equipped with a 900W rms *PWM (Pulse Width Modulation) technology
amplifier which allows an incredible reduction of its weight (relation 1:3)and efficiency
3 time higher than a traditional technology amplifier
- Ultra-light and powerful custom 15” (380 mm) woofer with neodymium magnet –
(double coil 100 mm). Die-cast aluminum frame.
- ADAP(Advanced Dynamic Active Protection)
- Two separate input channels (left & right) for stereo applications each featuring:
- XLR/Jack Neutrik® input – XLR Neutrik® Link connectors
- XLR high-pass filtered output to connect mid-high satellite speakers
- Volume control
FBT MaxX 5A
FEATURES:
- 2-way bi-amplified system in Bass-Reflex
- 380mm (15”) custom B&C speaker with 64mm voice coil and neodymium magnet
- 25mm (1”) throat B&C compression driver with 36mm (1,4”) voice coil
- 400Wrms amplifier PWM for low frequencies
- 100Wrms class AB amplifier for high frequencies
- Analog signal processor with limiter
- Control panel with: Combo XLR/Jack input, XLR link; Gain and Volume; 3-Band
EQ (High, Mid, Low); Ground-Lift, Led limiter
- 90°H x 60°V constant directivity horn
- 4 x M10 anchoring points, 35mm (1.38”) pole mount socket, hardware for wall mount
facility, integrated handles