Specifications

1 INTRODUCTION

Thank you for purchasing a Martin Audio M2 system controller and ICT500

compact loudspeaker system. The M2 is used to optimise the performance

of the ICT500, whether it is used as a stand-alone system or with additional

sub-bass enclosures.

2 UNPACKING

Every Martin product is built to the highest standard and thoroughly

inspected before it leaves the factory. After unpacking the unit, examine it

carefully for any signs of transit damage and inform your dealer if any such

damage is found. It is suggested that you retain the original packaging so

that the unit can be repacked at a future date if necessary.

Please note that Martin Audio and its distributors cannot accept

responsibility for damage to any returned product through the use of non-

approved packaging.

Martin Audio – M2 and ICT500

ENGLISH

This equipment conforms to the requirements of the

EMC Directive 89/336/EEC, amended by 92/31/EEC

and 93/68/EEC and the requirements of the Low

Voltage Directive 73/23/EEC, amended by 93/68/EEC.

Standards Applied EMC Emission EN55103-1:1996

Immunity EN55103-2:1996

Electrical Safety EN60065:1993 (ICT500)

EN60065:1998 (M2)

CONTENTS

GUIDES