User`s guide

All material © 2007. Martin Audio Ltd. Subject to change without notice.
1 Introduction
2 Unpacking
3 Blackline
+
Series overview
3.1 2-way passive full-range systems
3.2 2-way dual-lf, full-range system
3.3 3-way horn-loaded, full range systems
3.4 Sub-bass systems
3.5 Grille removal
4 Safety first
4.1 Pole or stand mounting
4.2 Stacking
4.3 Rigging and suspension
5 Amplification
6 Connections
7 Cable lengths
8 Recommended controllers
8.1 M3
+
2 input, 4 output analogue system controller
8.2 DX1 2 input, 6 output digital loudspeaker management system
8.3 DX2 4 input, 8 output digital loudspeaker management system
8.4 Engineer Installed system digital management processor
9 System configurations
9.1 Passive systems
9.2 Bi-amplified systems
9.3 Tri-amplified systems
10 M3
+
Configuration
10.1 Front panel With Sub mode
10.2 Choosing a power amplifier
10.3 M3
+
internal jumper configuration
10.4 Combo top card
10.5 M3
+
F215
+
top card*
10.6 M3
+
H3A
+
top card*
10.7 M3
+
218
+
top card*
• Pending. Please contact [e-mail]
for further information.