User`s guide

All material © 2007. Martin Audio Ltd. Subject to change without notice.
10.4 Combo top card
For use with Blackline F8
+
, F10
+
, F12
+
, F15
+
, S12
+
, S15
+
, S18
+
and S218
+
Jumper settings
Important: Combo Card jumpers must be set to suit the Blackline
+
loudspeaker system to be used.
Note again. These jumpers should be set by experienced electronics technicians only.
Remove the M3
+
lid and locate the jumpers on the Combo Card. Use J1, J2, J5 & J6 to configure F8
+
, F10
+
,
F12
+
& F15
+
and J3, J4, J7 and J8 to configure the M3
+
for S12
+
, S15
+
, S18
+
& S218
+
as follows:
Quick-start illustrations
Set the M3
+
Combo Card to suit the main or main/sub combination as shown in the following illustrations:
F8
+
only (Front panel in Full Range mode)
F8
+
with S12
+
, S15
+
, or S18
+
(Front panel in With Sub mode)