Specifications

1 INTRODUCTION

Thank you for purchasing a Martin Audio MX5 system controller.

The MX5 is the latest and most advanced analogue Martin Audio

loudspeaker management system and can be configured to optimise the

performance of any combination of Martin Audio high end loudspeakers.

The MX5 includes the following features:

1. Single plug-in board system-specific.

2. Accurate level controls with ± 6dB of gain.

3. All star grounding with separate buses for signal 0V, output 0V and digital

0V giving extreme low noise capabilities.

4. Individual voltage regulation of analogue display and output sections.

5. Enhanced output drive capabilities and balancing.

6. Absolute phase adjustment and band edge phase trim.

7. Ten sections of signal delay all pass filters for driver offset compensation.

8. Program dependant attack times on each limiter section.

9. Configurable as a ‘1 in - 4 out’ line level distribution amplifier with all level

and limiter functions operable.

10. LED peak programme meters on each band.

Martin Audio – MX5 System Controller

ENGLISH

This equipment conforms to the requirements of the

EMC Directive 89/336/EEC, amended by 92/31/EEC

and 93/68/EEC and the requirements of the Low

Voltage Directive 73/23/EEC, amended by 93/68/EEC.

Standards Applied EMC Emission EN55103-1:1996

Immunity EN55103-2:1996

Electrical Safety EN60065:1998

CONTENTS

GUIDES