Specifications

3.1 MECHANICAL

The MX5 is housed in an all steel 1U 19" rack case. In permanent

installations, the MX5 should be rack mounted using the four holes in the

front panel. Additional support may be required for heavy duty road use.

IMPOR

TANT: THE MAINS LEAD SUPPLIED MUST BE CONNECTED

AS BELOW:

GREEN/YELLOW - EARTH

BLUE - NEUTRAL

BROWN - LIVE

Mains voltage tolerance ± 10% on each setting.

Fuses type T semi-delay

100-120V 500mA(L)

220-240V 250mA(L)

ARNING: The MX5 controller must always be operated with the

mains safety connected.

3.2 INITIAL SETTINGS

MX5 Controllers are supplied with the adjustments set as follows:

Mains voltage 240V

Ground switch On

Limiter threshold 2V setting

Plug-in board System-specific

Martin Audio – MX5 System Controller

ENGLISH

This equipment must be earthed.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT EXPOSE TO RAIN

OR MOISTURE

It should not be necessary to remove any protective earth or signal cable

shield connections.

CONTENTS

GUIDES