Specifications

Always use 2-core + screen ‘balanced’ type signal leads, even for
unbalanced circuits. The screen should be regarded as separate from the
signal return, even if they are connected together at one end of the line.
For either balanced or unbalanced operation, always connect the signal
between Pins 2 and 3. The input cable shield should be derived from
equipment which is sourcing the input provided that normal safety
requirements are met (ie the mains earth is correctly connected)
(See Fig 2).
Martin Audio – MX5 System Controller
ENGLISH
6
1
2
3
1
2
3
2
1
3
2
1
3
Source
Source
Chassis
Grounded
Shield
Signal
Grounded
Shield
MX5
Input
MX5
Input
Ground
Lift
Resistor
Ground
Lift
Resistor
Fig 2.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES