Specifications

Procedure

Although a single array (per side) will be used we can split the array into upper and lower

sections – each having its own progressive curvature.

Lower (floor) section

1) Design a system to cover the floor-under-balcony area only - using 5 W8LCs in

Auto mode. Set the coverage start & stop to cater for the floor coverage required.

Dual progressive curvature array – lower section only

Set the upper of the five cabinets to the height of the floor at the front of the balcony –

point Y on the ViewPoint Array page shown overleaf…

Dual progressive curvature array – lower section point Y = balcony height (6.5m)

(Make a note of the Z height as well – you’ll need this for step 5 later)