Specifications

5.5.23 System control and Band-zoning
Rack patching
ViewPoint’s Processor page recommends suitable controller presets for the line
array configuration being plotted. These controller presets ensure that larger line
arrays are correctly band-zoned. It is important that racks are correctly patched.
W8L or Longbow amplifier rack patch
Standard W8L Longbow presets configure Martin Audio DX1 or XTA DP226
outputs for the following controller-to-amplifier patches:
DX1 o/p 4xW8L/
Longbow
6xW8L/
Longbow
8xW8L/
Longbow
10xW8L/
Longbow
12xW8L/
Longbow
14xW8L/
Longbow
16xW8L/
Longbow
6 Upper
HF
Upper
2 HF
Upper
4 HF
Upper
6 HF
Upper
8 HF
Upper
10 HF
5 Middle
HF
Upper
2 HF
Upper 4
HF
Middle
4 HF
Middle
4 HF
Middle
4 HF
Middle
4 HF
Middle
4 HF
4 Lower
HF
Lower
2 HF
Lower
2 HF
Lower
2 HF
Lower
2 HF
Lower
2 HF
Lower
2 HF
Lower
2 HF
3 Upper
MF
Upper
2 MF
Upper
4 MF
Upper
6 MF
Upper
8 MF
Upper
10 MF
Upper
12 MF
2 Lower
MF
All MF Lower
4 MF
Lower
4 MF
Lower
4 MF
Lower
4 MF
Lower
4 MF
Lower
4 MF
1 All LF All LF All LF All LF All LF All LF All LF All LF
Note that W8L Longbow and W8LC band zoning is from the bottom upwards as follows:
Mid frequencies
Bottom 4 cabinets in the lower zone
The rest of the cabinets in the upper zone
High frequencies
Bottom 2 cabinets in the lower zone Up to 4 cabinets in the middle zone
The rest of the cabinets in the upper zone
W8LC amplifier rack patch
Standard W8LC presets configure Martin Audio DX1 or XTA DP226 outputs for the
following controller-to-amplifier patches:
All material © 2007. Martin Audio Ltd. Subject to change without notice.