Specifications

5.5.17 Saving a design

5.5.18 Loading a design

5.5.19 Printing ViewPoint

5.5.20 Exiting the programme

5.5.21 ViewPoint

support

ViewPoint

(Version 3.03)

5.5.1 Introduction

ViewPoint

software will automatically calculate the splay angles of a W8L Series

array and will indicate the optimum controller (processor) preset and amplifier patch

information once venue and array data has been entered. You can print out array,

venue, rigging and patch information and save your work to disk.

Please Note:

ViewPoint

produces sonically accurate results based on high resolution

loudspeaker data and the audience coverage but you must use the amplifier

patch and one of the controller preset indicated for accurate Band Zoning and

smooth coverage.

1) The controller preset names shown on ViewPoint

correspond to the

preset names on our DX1, XTA DP226 or XTA AudioCore data files.

2) Please ensure that your controllers are running our standard reference

presets for the W8L Series loudspeaker in use.

3) Users should start with a unity gain, zero delay, flat frequency response

controller input section and revert back to our standard presets at the

beginning of each venue setup to avoid using settings contaminated with

room equalization from a previous gig.

5.5.2 Installing ViewPoint

ViewPoint

is supplied in a zip folder which contains a setup executable file

ViewPoint 3.03.exe.

Double-click on this and follow the on-screen prompts.

CONTENTS

GUIDES

ENGLISH ONLY