Specifications

The following pop-up window will appear.

Enter R and A in the right hand boxes and click on Get X-Y.

Click on Close and Update to copy the X and Y data in to the Length and Height

boxes and close the pop-up window or click on the x symbol in the top right hand

corner of the pop-up window to close it without copying.

Note: you can also use this in reverse to calculate angles from X and Y data.

5.5.4.3 Single Point Survey

This option enables you to enter all plane data from a single reference point directly

under the intended flying point or above the stack position.

We recommend that you use a tripod to mount your laser distance measurement

device and your inclinometer since the data entered is very sensitive to small errors.

Click and a tool will appear that details the diagonal

length and angle for each plane beginning and end.

CONTENTS

GUIDES

ENGLISH ONLY