Specifications

A two-motor lift from a lifting bar will…

Enable more extreme up-tilts and down-tilts because the lifting bar extends

beyond the front lifting point forward of the normal grid tab in the front

position and extends the rear lifting point behind the normal grid tab in the

rear position

Spread the array load across two rigging points

Allow fine angular control using the motors

Load Indicators

Depending on the grid configuration the 'Rear Pick Load' and 'Front Pick Load' are

displayed as well as total mass. These loads as well as the forces between cabinets are

checked after each change of the array or grid.

Should either of the pick loads become less than zero or the inter-cabinet forces

become too high then a mechanical warning window will appear.

5.5.15.2 Stacked arrays

CONTENTS

GUIDES

ENGLISH ONLY