Specifications

5.5.16 Processor page

The Processor page shows a controller-to-amplifier patch table and indicates which

controller settings to use for the design.

The page also shows power amplifier rack layouts to ensure that the amplifiers share

the power demand adequately (see Quick Start sections for advice on rack layouts and

mains distribution). Move your mouse cursor over the greyed out amplifier racks to

see further rack details.

Historically, array cabinets have been numbered from top to bottom (see Quick Start

sections). W8L and W8LC line array section impedances are all 8 ohms and usually

driven in pairs so that each power amplifier channel sees a 4 ohm load. W8LM line

array section impedances are about 13 ohms and are usually driven in fours to present

a 3.25 ohm load.

CONTENTS

GUIDES

ENGLISH ONLY