P/N 35010033-A user manual
Dimensions All dimensions are in millimeters ©2012 Martin Professional A/S. Information subject to change without notice. Martin Professional A/S and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual.
Contents Dimensions ................................................................................................................................ 2 Contents..................................................................................................................................... 3 Safety information ...................................................................................................................... 4 Product overview ............................................................
Safety information The following symbols are used to identify important safety information: Caution! Safety hazard. Risk of personal injury. Caution! Burn hazard. Hot surface. Do not touch. Danger! Hazardous voltage. Contact will cause electric shock. Caution! Fire hazard. Warning! This product is not for household use.
• Do not remove the covers or attempt to repair a faulty machine. Refer any service not described in this manual to Martin. • Do not operate the machine if any parts are damaged, defective or missing. • Moisture and electricity do not mix. Do not aim haze output at electrical connections or devices. Preventing burns and fire • The haze produced by the machine is hot enough to cause burns when it leaves the nozzle, and very hot droplets of fluid escape occasionally.
Preventing breathing problems 6 • A haze machine can operate safely only with the haze fluid it is designed for. Use the machine only with fluids specified under “Haze fluid options” on page 20 or you may cause the release of toxic gases, presenting a severe health hazard. You will also probably damage the machine. • Do not create dense haze in confined or poorly ventilated areas.
Product overview Product description The Jem Compact Hazer Pro™ is a versatile haze machine from Martin Professional designed for the highly demanding professional market. Its ability to produce exceptionally fine atmospheric haze in a short period of time makes it an ideal choice for rental houses, shows, theatres, TV studios, clubs, bars, cruise ships, theme parks and more.
Product details Shutdown switch AVR program upload socket (behind fluid tank) Digital remote socket Main power switch Power inlet connector 5 pin DMX input and link Digital control panel Fluid tank Haze output port Warning, high temperature vapour and surfaces! 8 Product overview
Quick Start You are no doubt eager to switch on the machine and try it out by making a lot of haze. This section tells you how to do that. However, please also make the time to read the safety and servicing instructions in the remainder of this manual. Setting up Locate the machine in a suitably large area with nothing in front of the haze output. Fill the fluid tank with Martin C-Plus Haze Fluid™ only. Use of other fluid will void the warranty.
Installation and setting up DANGER! DO NOT operate the haze machine until you have read and observed all the precautions listed under “Safety information” on page 4. Location The Jem Compact Hazer Pro™ is designed to be located on the floor or may be suspended using the optional flying bracket. If suspending the machine, a standard truss bracket (available from Martin) should be attached to the machine’s flying bracket with an M12 bolt and nyloc nut.
Before connecting the haze machine to power, verify that the AC supply is adequately dimensioned for the current draw of the machine. The machine requires: 4.4A @ 230V (EU model) 8.68A @ 120V (US model) Check that the local AC voltage is appropriate, as indicated on the machine’s serial number label. If your AC voltage is outside the appropriate range, do not use the machine. Contact Martin Service for assistance. Setting up Fill the fluid tank only with Martin C-Plus Haze Fluid™ (see page 20).
Do not turn off the power without using the Shutdown switch. This will cause the unit to enter a cleaning cycle when next switched on, and over time will lead to blockages and malfunction of the unit. The cleaning cycle on power up is shown on the display as WT44” counting down to “WT00”, as for the shutdown cycle. Once the display reaches “WT00”, normal operation of the unit will start.
Control settings Overview The digital display in the centre of the top panel allows you to configure the machine using option menus. Digital display Menu previous/next buttons Value down/up buttons Enter/store button The machine is factory set so the lower of the ‘Value down/up’ buttons increases a setting. It is possible to change this. Prior to powering the machine up simply press and hold the button you wish to use to increase a setting and press the main power button.
Setting Fan speed Use the Previous / Next buttons to select the option. Use the Up/Down buttons to select the fan speed from – . Press the Enter button to store the fan setting. The fan will run continuously if set above 0% and the RUN menu is set to FAN, TIME or CONT. If haze is being produced and the fan is off or set to a low speed, the fan speed will be automatically increased to prevent build-up of haze at the machine output.
Setting the master-slave link mode It is possible to control several machines from one digital remote. The machine with the remote plugged into it becomes the Master. The other machines are Slaves. The machines are interconnected with DMX cabling. Use the Previous / Next buttons to select the option. Use the Up/Down buttons to select (slave unit) or (master unit). Press the Enter button to store the link setting. The machine should be set to only if it is running as a master.
ADDR LINK ALT PRME Control settings
Remote control Overview The Jem digital remote control, available separately, may be used for remote control of the Jem Compact Hazer Pro™. Several machines may be controlled from one remote using the LINK function (see page 15). Display XLR socket XLR socket (on rear) Timer button Haze button Functions The remote control provides the following functions: • Haze button: turns haze output on and off. Press once to start haze and again to stop. • Timer button: turns the haze timer on and off.
DMX control Overview DMX is a digital control system widely used in entertainment and architectural lighting. Any controller meeting the DMX-512 standard may be used to control and program the haze output of the Jem Compact Hazer Pro™. When a DMX signal is present, the Jem Compact Hazer Pro™ standalone functions do not work. To fire the unit from the control panel or remote control, the DMX controller must be powered off or disconnected.
Channel 1 Haze output Level Channel 2 Fan output level (fan will always run if haze is active) Channel 3 Special functions DMX value range 0-19 20-29 30-39 …….. 210 -255 DMX value range 0-19 20-29 30-39 …….. 210 -255 DMX value range 0-50 51-100 101-150 151-200 201-255 Function Macro description Idle range Haze 5% Haze 10% ……. Haze 100% Function None Macro description Idle range Fan 5% Fan 10% …….
Haze fluid types The Jem Compact Hazer Pro™ must only be used with C-Plus Haze Fluid™. Martin supplies high quality haze fluids that are based on ultra-pure deionized water. No other fluid is suitable for use. DANGER! The Jem Compact Hazer Pro™ can run safely only on the specific haze fluid it is designed for. Use ONLY the Martin haze fluid designated in this manual. NEVER use any other type of fluid, or toxic gas may be produced.
Basic service Before servicing the Jem Compact Hazer Pro™, read and observe all the precautions listed in “Safety information” on page 4. Any service not described in this section must be carried out by a Martin service technician. Cleaning Excessive dust, haze fluid, and dirt build-up will degrade performance and cause overheating and damage to the machine that is not covered by the product warranty.
Troubleshooting Problem Probable cause(s) Suggested remedy Machine not at operating temperature Wait until message no longer shown set to 0 Increase setting set to 0 Increase setting DMX signal present Disconnect or turn off DMX controller DMX address setting incorrect Change DMX address (page 14) Poor connection in DMX line Check DMX cables and connections LINK menu is set to SEND Set LINK menu to RECV Haze output is weak Machine requires priming Prime machine (page 15)
Status messages message reason The heaters are Off, the unit is shut down. The unit is heating up to operating temperature. The heater is at operating temperature, but Haze is not turned on (RUN set to STBY or HAZE set to 0%). The heater is at operating temperature and the unit is under DMX control. The heater is in run mode and is producing haze. The machine has detected an error with its calibration settings and will not operate. Call Martin Service.
Specifications Physical Length ......................................................................................................... 532mm Width ........................................................................................................... 224mm Height .......................................................................................................... 278mm Dry weight ...................................................................................................... 8.
Included items: User manual Power cable Fluid Container 2.5L Ordering information JEM Compact Hazer Pro™ haze machine 115V ................................. P/N 92225960 JEM Compact Hazer Pro™ haze machine 230V ................................. P/N 92225950 Accessories Remote Control, JEM Compact Hazer Pro™ ...................................... P/N 92765040 Air diverter, JEM Compact Hazer Pro™ .............................................. P/N 92625011 Flying kit, JEM Compact Hazer Pro™ .................
Specifications
Dis p o s ing o f th is p ro d uct Martin™ products are supplied in compliance with Directive 2002/96/E C of the E uropean Parliament and of the Council of the E uropean Union on WE E E (Waste E lectrical and E lectronic E quipment), as amended by Directive 2003/108/E C, where applicable. Help preserve the environment! E nsure that this product is recycled at the end of its life. Your supplier can give details of local arrangements for the disposal of Martin products.
Martin Professional A/S,Olof Palmes Allé 18, DK-8200,Aarhus N Phone: +45 87 40 00 00 Internet: www.martin.