Manual

Remote contro
l
17
Remote control
Overview
The Jem digital remote control, available separately, may be used for remote
control of the Jem Compact Hazer Pro™. Several machines may be controlled
from one remote using the LINK function (see page 15).
Functions
The remote control provides the following functions:
Haze button: turns haze output on and off. Press once to start haze and
again to stop.
Timer button: turns the haze timer on and off.
Haze level setting (HAZE = 0 -100%)
Fan speed setting (FAN = 0 -100%)
Timer run time/off time settings (TRUN = 1 -90 seconds, TOFF = 20-89
seconds)
Run mode (RUN = OFF, STBY, FAN, TIME, CONT)
The functions are the same as on the built in control panel and are described on
page 13.
The RUN menu duplicates the functions of the Haze and Timer buttons. The
buttons are simply a quick way to control this menu function.
Connection
The remote control has two identical XLR sockets on the top and back for
connection to the Jem Compact Hazer Pro™. Plug the cable provided with the
remote control into one of these sockets and into the 3-pin XLR socket on the
rear panel of the Jem Compact Hazer Pro™.
The remote control is powered through its cable by the Jem Compact Hazer
Pro™; no batteries are required.
The cable may be extended to up to 25 m (82 ft.) with a 3-pin XLR DMX cable,
available from your Martin dealer.
Display
Timer button
Haze button
X
LR socket
X
LR socket
(on rear)