Owner manual

Gamma 1-16 LSC&
Gamma 2-16 LSC&
8 Maintenance and service
Version 04/2013, Rev. 1.1 of 16/12/2013 • sb
85
Translation of the original operating manual
Pos: 210 /20 0 Ch rist/ 360 G T-B A L abo r-Pilot (S TAND ARD MODU LE )/080 W a rtung u nd In stan dhal t ung/080 -00 30 Inst and haltu ngsa rbeit en Labo r-RV C @ 6\ mod_129 913 772 984 0_6 8.docx @ 3 529 7 @ 2 @ 1
8.3 Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The freeze-dryer is subject to high mechanical stress. In order to be able to
withstand this high level of stress, high-quality components were used
during the production of the freeze-dryer. Nevertheless, wear cannot be
excluded and it may not be visible from the outside.
This is why we recommend having the freeze-dryer checked by the
manufacturer during an inspection once per year.
Information and appointments:
From Germany
• Use the service request form at
www.martinchrist.de  [Service Area]
or contact
• Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. [phone]
E-mail: [e-mail]
Outside Germany:
• Contact our agency in your country. All agencies are listed at
www.martinchrist.de  [Contacts]  [Foreign agencies]
NOTE
• If you would like to utilise our after-sales-service, please state the type
of your freeze-dryer and its serial number .
• Please use our service request on the Internet (see above).
Pos: 211 /01 0 Univ ersal module/ Sei tenwe chsel @ 0\ mod_12 0211624 4312_0 .docx @ 105 @ @ 1