Instruction Manual

Rotational Vacuum Concentrator RVC 2-33 IR
6 Operation
48
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
Translation of the original operating manual
Pos: 147 /20 0 Ch rist/ 370 R VC-B A (S TA NDA RDMODU LE) /06 0 Betri eb/CD pl us/06 0- 0050 -0030 -004 0 Pr ozess - un d Anl agen -Inf orm ation en @ 25\ mo d_14 049851 528 70_ 68.d ocx @ 187 359 @ 4 @ 1

6.5.3.4 Process and equipment information
The "Process & equipment Information " menu informs the user about any
error, process, or system messages.
In the event of a message, a sound signal can be heard and the symbol
" " is displayed on the status bar. In addition, the process and equipment
information is displayed. If the user is in a menu, the window will not be
displayed until the user quits the main menu.
1 Message
2 Status of the
Information
3 Number of messages
pending
4 Function key for
quitting the menu
5 Function key for
acknowledging the
message
Fig. 39: Structure of the process & equipment info window
In addition, the menu can be opened at any time to check whether any
messages are pending.
NOTE
A detailed list of all messages can be found in chapter 7 "Malfunctions and
error correction".
Information status
Every piece of information shown in the process & equipment information
window receives a certain status:
Information present, not acknowledged
Information present, acknowledged
Error no longer present, information not acknowledged
The sound signal continues until all the information is acknowledged.
Once some information is no longer present but has been acknowledged,
the information will be removed from the process & equipment information
window.
In order to quit the process & equipment information window, you have to
acknowledge all of the pieces of information so that the left-hand function
key "back" can be displayed.
Pos: 148 /01 0 Uni v ersal mod ule/S eit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1