User`s guide

Attach the frame to the non-inflated floats.

Attach the frame by pushing the flags into the

pockets on the floats.

Now pump up the floats to reach the operating

pressure.

Screw the crossbar onto the front frame pipe

and prepare the longitudinal centre tube for

mounting.

Before inflation, check the status of the valves.

Set the valves to the closed position, slightly

push on the centre pin, turn the pin and release

the pressure on the pin to enable it to sit in the

higher position.

Put the rope through the lugs on the bottom of

the trampoline and tauten it firmly. Fix the end of

the rope it the notch. This will help you stretch

the trampoline.

Fix the keel fins on the bottom of the non-

inflated floats. Push the fins into the pockets on

the floats.

Opening

the valve

Air

Closing the valve