Operating Instructions

BDA Captura 100 MIFARE® / 2020-10-26 (GB)
11
USING THE INSTALLATION CARD 
During installaon, one or more installaon cards can be used. The installaon cards are ready for immediate use
and do not have to be programmed. With the installaon cards, the basic funcons (opening and closing) can be
carried out on the lock. It is not possible to program user cards with the installaon card. The installaon card can no
longer be used on a lock as soon as the master card has been programmed.
Closing
Hold the installaon card
in front of the lock.
Opening
Hold the installaon card
in front of the lock.

Hold the master card
in front of the lock.
PROGRAMMING THE MASTER CARD
Irrespecve of the desired operang mode, a master card must always be programmed before further programming
and operaon. Only one master card can be programmed per lock! The programming of the master card can be
carried out when the lock is closed as well as when it is open. If the lock is closed aer the master card has been
programmed, the next step must be an emergency opening (see Emergency opening, P. 13).
The locking system is in “assigned use“ mode aer the master card has been programmed. If you would like to use
the lock in “shared use“ mode, the next thing to do is to change the operang mode. To do this, please follow the
instrucons on page 15 and then connue with the secon “Closing and Opening“ on page 12.