Operating Instructions

BDA Captura 100 MIFARE® / 2020-10-26 (GB)
18
Hold the programming
card “P4: Auto Locking“
in front of the lock again.
Automac locking is
acvated.
Automac locking is acvated.
Hold the programming
card “P4: Auto Locking“
in front of the lock again.
Automac locking is
deacvated.
Automac locking is deacvated.
Hold the master card
in front of the lock.
BATTERY WARNING
The locking system is equipped with a baery management system which uses visual and acousc signals to indicate the
need for baery replacement in the event of reduced baery power. The baery warning takes place in two phases:
The sengs are saved even without a power supply (e.g. in case of baery replacement, or in case the baery
should be completely empty). Baery replacement should be carried out within 2 minutes.

Before an acon can be carried out (closing /
opening / programming), a baery warning is given.
The baeries should be replaced.
The baery warning is also given every 60 minutes.

The lock can only be opened. Before the lock opens,
a baery warning is given. The baeries must be
replaced without delay.
The baery warning is also given every 60 minutes.