Operating Instructions

BDA Captura 100 MIFARE® / 2020-10-26 (GB)
19
REORDERING MASTER CARDS
With this locking system, you have the opon of ordering replacements for your master cards at your own expense.
For this you obtained a service key together with the master cards. Please keep the service key carefully and secu-
rely. The service key makes it possible to reorder the master card specied there.
To reorder these cards, please contact LEHMANN Vertriebsgesellscha mbH & Co. KG at the following email address:
[e-mail]
In your email, please give us your contact data and the service key. In your email, please also state the number of
replacement cards you require.
FIRMWARE UPDATE
You have the opon of updang the rmware of the lock. A special adapter is required for this. Firmware updates for
this lock are only made available on the website www.lehmann-locks.com if required (e.g. for technical reasons). You
will receive further informaon on the implementaon and installaon together with the rmware update.
DISPOSAL
Dispose the locking system in accordance with local regulaons and guidelines. Remove the baery and dispose
them separately in accordance with the naonal regulaons. When disposing of parally discharged baeries, make
sure that there are no short circuits between the baery poles (risk of explosion and re).
!
TROUBLE SHOOTING
In the following overview you can see the acousc and visual signals that indicate faults:
Transponder
card cannot be
programmed.
Possible reasons:
• Storage space is used up
• Card is not compable
• Master card has not yet been programmed
Available storage
space in the lock
is used up.
Possible reasons:
• 250 user cards have already been
programmed in the lock.
Baery warning
Phase 1
It is recommended that you replace the
baery.
Baery warning
Phase 2
The baery must be replaced without delay.