Operating Instructions

BDA Captura 100 MIFARE® / 2020-10-26 (GB)
4
OVERVIEW OF TRANSPONDER CARDS
As user cards, you can either use LEHMANN user cards or cards of a third-party provider complying with ISO 14443A.
Please note the following possible restricons when using user cards of third-party providers:
• The comprehensive security concept, which was specially designed for this locking system in conjuncon with
the user cards of LEHMANN Vertriebsgesellscha mbH & Co. KG, may be aected by the use of user cards of a
third-party provider.
• The “Shared use“ operang mode is only possible with user cards from third-party providers if they have the
appropriate write permission for the user card.
• Transponder cards with a so-called “Random-UID“ are not supported.

For the highest possible level of safety, transponder cards based on MIFARE® DESFire are recommended.
MIFARE® Classic transponders are of limited use.
Please note that installaon cards, master cards, user cards and programming cards must be ordered separately.

Card type 
Installaon card
(only for assembly
and tesng
purposes)
The installaon card can be used specially for assembly and tesng purposes in order to perform ba-
sic funcons on the lock (opening and closing). Furthermore, the lock can be closed using the installa-
on card for transporng the furniture to its desnaon. This card is for universal use. Any number of
installaon cards can be used at any lock. Prior programming of a master card is not necessary. Aer
a master card has been programmed for the rst me, the lock is disabled for the installaon card.
The use of an installaon card is oponal.
Master card
For complete commissioning, a master card must be programmed for both operang modes. The
master card is required for starng and terminang programming operaons. This also includes the
programming of user cards in “Assigned use“ mode. The master card also enables the so-called Facili
-
ty Manager funcon and the emergency opening of the lock. A maximum of one master card can be
programmed per lock. You can use one master card for several locks.
User card
User cards are used to open and close the lock. In “Assigned use“ mode, up to 250 user cards can be
programmed on one lock. In “Shared use“ mode, one user card can be used temporarily on one lock.
It is possible to program one user card on several locks in “Assigned use“ mode, and at the same me
on one lock in “Shared use“ mode.
Programming
card set
For certain programming funcons, programming cards are required in conjuncon with the
master card. The programming card set consists of 3 universal programming cards:
• P1: Mode (change of mode)
• P2: Sound (acvang or deacvang acousc signals)
• P3: Reset (reset to factory sengs)
Programming card
„P4: Auto Locking“
The universal programming card “P4: Auto Locking“ can only be used in the operang mode “assi-
gned use“. The funcon can be acvated together with the master card. Aer opening the lock with a
programmed transponder in the operang mode “assigned use“, the lock closes automacally aer 5
seconds once this funcon has been acvated.
Update card
In addion to the master card, you will receive an update card. In conjuncon with the master
card, the update card allows rmware updates to be loaded into this lock.
Service key
In addion to the master card, you will receive a card with an individual service key. Please keep the
card with the service key carefully and securely. The printed service key allows you to reorder master
cards. It is not possible to reorder a master card without a service key! This card has no electronic
funcon!