Operating Instructions

BDA Captura 100 MIFARE® / 2020-10-26 (GB)
7
All dimensions in mm.
IMPORTANT: Install the lock only when it is unlocked. Hand-ghten all screws. Carry out all programming
processes and funconal checks with the cabinet door open. In the event of a malfuncon, you
always have access to all components.
The use of the ejector pin A1 in conjuncon with spring-loaded hinges must be checked on a
project basis.
1
45
54
10
72
)( 32
02
*)( 35
58
48
1
45
54
10
72
)( 32
02
*)( 35
58
48
* For an adequate ne adjustment of the locking pin, an
average dimension of 53 mm is recommended

Mounng the lock with locking pin SD Type A, e.g. for hinge doors:
Side wallInside of the door
Side wall
Door
A lightpoint pin can oponally be installed to display opcal signals on the furniture front.
Lightpoint O16.1 for wood
with material thickness
of 16-21 mm
Lightpoint O10.1 for HPL
with material thickness
of 10-15 mm
9,5
 5
 6,5
1,9
15,5
1,9
 6,5
 5