System Description
BDA M610 TA03 / 2021-08-17 (GB)
10
STRUCTURE OF THE KEYPAD TA03
You can cancel any operaon at any me by pressing the cancel buon
x
. When the cancel buon is pressed,
there is one short red ashing. Any input already made is deleted.
During operaon, make sure that each key input is acknowledged by a light signal at the LED display! If a light signal
does not appear, the key input was not accepted.
The opcal signals are dierenated in colour and in duraon as shown below:
Note:
If no further key input is made during the entry of a code or during a programming operaon, the already made
entries will be discarded aer 30 seconds. The old code remains valid.
Aer the third entry of an invalid code, the opon to enter a code is blocked for 30 seconds. The display ashes red
nine mes. When a key is pressed during these 30 seconds, the LED display ashes red once.
Numbers 0-9
Cancel Enter
LED display
PLAUSIBILITY CHECK OF BOLT END POSITION
The locking system has a plausibility check of the bolt end posion. If the value is not within the expected range
when closing, the LED display ashes red for four mes. The lock is not locked. Check the correct mounng posion
of the lock and the striker plate.
Trip point for removing
the cover for emergency
power supply
Short ashing
Long ashing
Connuous light